Each Zutta LED Face Treatment Mask is capable of delivering personalized treatments based on the needs of your skin.


Yes! LED (Light Emitting Diode) therapy has been studied and tested across hundreds of peer-reviewed clinical trials, with overwhelmingly positive results for skin health. The treatment is painless, non-invasive, pleasant, cost-effective and delivers results.


The light can be bright when powered on. We provide eye protection attachments with each mask that you can attach if your eyes are extra sensitive.

Do not aim or look directly into the lights. Doing so may cause temporary vision discomfort. Placement of the device should ensure that no part of the device is covering the eyes.


Using the Zutta LED Face Treatment Mask after you cleanse and tone your face is ideal. After you complete the treatment, you may proceed with serums, mosturizer and sun protetion as desired!


To see great results, the Zutta LED Face Treatment Mask needs to be used only once daily. For best results, we recommend that you do either a 10 minute Anti-Aging treatment or a 10 minute Anti-Acne Treatment daily, or some combination of both, depending on your skin’s needs.


To begin using the Zutta LED Face Treatment Mask, follow the How To Use guide, which can be found inside the box, or watch the video that can be found on the website.
After cleansing your face, place the Zutta LED Face Treatment Mask comfortably over the face and adjust the velcro tabs at the back. Press and hold the controller button for 3 seconds to turn on the Zutta LED Face Treatment Mask, select treatment mode on the remote (Anti-ageing, Anti-Breakout or combined) and start your treatment!


The Zutta LED Face Treatment Mask is USB-rechargeable. A two and a half hour charge can deliver up to 10 treatments. Plug the USB-C power/charging cord into the port connector of your Zutta LED Face Treatment Mask, then plug it into a universal USB power adapter. Device is fully charged when the green power indicator light next to the charging port is turned off. Remember to unplug from the charger before treatment.


Wipe the inside with a damp cloth to remove any residue from skin oils after each use. Make sure the Zutta LED Face Treatment Mask is unplugged and turned off. Then use a damp, soft, or microfiber cloth to clean the facial area. Repeat until the Zutta LED Face Treatment Mask is clean and free of any debris.


A blinking green light around device indicates that your Zutta LED Face Treatment Mask is low in battery and needs to be charged.


  • Zutta LED Face Treatment Mask in your choice of artist’s design
  • Universal USB charging cord and controller(5V)
  • Eye protection attachments
  • Storage bag

    • Storing your Zutta LED Face Treatment Mask in its storage bag in a dry environment is ideal.